Resetting The System; Default System Settings - Pioneer VSX 1020 Operating Instructions Manual

Audio/video multi-channel receiver
Table of Contents

Advertisement

Available languages

Available languages

Using other functions

Resetting the system

Use this procedure to reset all the receiver's
settings to the factory default. Use the front panel
controls to do this. Set MULTI-ZONE to OFF.
• Disconnect the iPod and USB memory
device from the receiver beforehand.
1
Switch the receiver into standby.
2
While holding down ENTER on the front
panel, press  STANDBY/ON.
The display shows RESET  NO .
Select 'RESET' using PRESET /, then
3
press ENTER on the front panel.
The display shows RESET? OK.
4
Press ENTER to confirm.
OK appears in the display to indicate that the
receiver has been reset to the factory default settings.
• Note that all settings will be saved, even if
the receiver is unplugged.

Default system settings

Setting
Digital Video Conversion ON
SPEAKERS
Speaker System
Speaker Setting
Surround Position
Crossover
X-Curve
DIMMER
Inputs
See Input function default and possible settings on
page 41.
HDMI
HDMI Audio
Control
Control Mode
Default
A
Normal(SB/FH)
Front: SMALL
Center: SMALL
FH/FW: SMALL
Surr: SMALL
SB: SMALLx2
SW: YES
IN REAR
80 Hz
OFF
brightest
Amp
ON
ALL
Setting
DIsplay Power Off
DSP
Power On Level
Volume Limit
Mute Level
Phase Control
Sound Retriever
Sound Delay
Dual Mono
DRC
SACD Gain
LFE Attenuate
Auto delay
Digital Safety
Effect Level
2 PL II Music Options
Neo:6 Options
Listening Mode
(All Inputs)
See also Setting the Audio options on page 67 for
other default DSP settings.
MCACC
MCACC Position Memory M1: MEMORY 1
Channel Level (M1 to M6) 0.0 dB
Speaker Distance
(M1 to M6)
Standing Wave
(M1 to M6)
EQ Data (M1 to M6)
Default
YES
LAST
OFF
FULL
ON
ON (iPod/USB, INTERNET
RADIO, ADAPTER PORT
function)/
OFF (Other functions)
0.0 frame
CH1
AUTO
0 dB
0 dB
OFF
OFF
90 (EXT.STEREO)/
50 (Other modes)
Center Width:3
Dimension:0
Panorama:OFF
Center Image:
3 (Neo:6 MUSIC)/
10 (Neo:6 CINEMA)
AUTO SURROUND
(2 ch/multi ch)/
STEREO (Head phones)
10'00"
ATT of all channels/
filters: 0.0 dB
SWch Trim: 0.0 dB
All channels/bands: 0.0 dB
EQ Trim: 0.0 dB
08
75
En

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Vsx-1020-kVsx-1020

Table of Contents