Pioneer VSX 1020 Operating Instructions Manual page 71

Using other functions
Setting
d,e,f
PCINEMA
(PureCinema)
d,f
P.MOTION
(Progressive Motion)
d
YNR
d
DETAIL
d,g
SHARP
(Sharpness)
d
BRIGHT
(Brightness)
d
CONTRAST
d,h
HUE
d
CHROMA
(Chroma Level)
a.If the video picture deteriorates when this settings is switched ON, switch it OFF.
b.• When set to a resolution with which the TV (monitor) is not compatible, no picture is output. Also, in some cases
no picture will be output due to copyright protection signals. In this case, change the setting.
• When AUTO is selected, the resolution is selected automatically according to the capacity of the TV (monitor)
connected by HDMI. When PURE is selected, the signals are output with the same resolution as when input (see
About the video converter on page 22).
• When a display is connected by HDMI, if this is set to something other than PURE and 480i/576i analog signals are
input, 480p/576p signals are output from the component output terminals.
c.• If the image doesn't match your monitor type, adjust the aspect ratio on the source component or on the monitor.
• This cannot be set when the resolution is set to PURE.
• NORMAL setting is only displayed when 480i/p or 576i/p analog video signals are being input.
d.This setting is only displayed when 480i or 576i analog video signals are being input.
e.If the picture does not display properly when ON is selected, select AUTO or OFF.
f. This setting is valid for component outputs and HDMI output.
g.This setting is not valid for HDMI output.
h.This setting is not displayed for component inputs.
What it does
This setting optimizes the picture for film material when the video
output is set to progressive. Usually set to AUTO; but try
switching to OFF if the picture appears unnatural.
Additionally, certain PAL movie video (576i, 25 frames/second
STB video output or DVD disc playback, etc.) that contain film
progressive material cannot be recognized as such by this
receiver. In such instances, if you choose ON, PureCinema mode
is activated.
Adjusts the motion and still picture quality when video output is
set to progressive.
Adjusts the amount of noise reduction (NR) applied to the Y
(brightness) component.
Adjusts how sharp edges appear.
Adjusts the sharpness of the high-frequency (detailed) elements
in the picture.
Adjusts the overall brightness.
Adjusts the contrast between light and dark.
Adjusts the red/green balance.
Adjusts saturation from dull to bright.
08
Option(s)
AUTO
ON
OFF
–4 to +4
Default: 0
0 to +8
Default: 0
–4 to +4
Default: 0
–4 to +4
Default: 0
–6 to +6
Default: 0
–6 to +6
Default: 0
–6 to +6
Default: 0
–6 to +6
Default: 0
71
En