Honda PCX125 2011 Owner's Manual page 110

8. Fill the crankcase with the
recommended oil (page
approximately:
1.0 US qt (0.9 )
9. Install the oil fill cap/dipstick securely.
10. Lock the rear wheel (page
11. Start the engine and let it idle for 3 5
minutes.
12. Stop the engine and wait 2 3 minutes.
13. Check that the oil level is at the upper
level mark on the oil fill cap/dipstick
(page 97 ).
14. Make sure there are no oil leaks.
If a torque wrench is not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Engine Oil & Strainer Screen
94 ),
29 ).
−
−
Servicing Your Honda
103