Honda PCX125 2011 Owner's Manual page 73

Parking
4. Use the helmet holder wire ( ) stored in
the tool kit to secure your helmet with
your scooter:
Open the seat (page
Route either end of the helmet holder
wire through the helmet's D-ring ( ).
Hook the loops of the wire onto the
helmet holder ( ).
Lower the seat and lock it securely.
66
Basic Operation & Riding
2
32 ).
3
4
To remove a helmet, open the seat
(page 32 ). Remove the helmet holder wire
and store it in the tool kit when it is not
used. Lower the seat and lock it securely.
UNDER SEAT
(2)
(2) helmet holder wire
(3) D-ring
(4) helmet holder
(4)
(3)