Controls & Features
Start Button
The start button ( ) is used for starting the
1
engine. Pushing the button in starts the
engine. See
Starting Procedure,
The starter motor will not operate if the
engine stop switch is in the OFF position
when the start button is pushed.
The electric starter will only work when
the rear brake lever is pulled in and the
side stand is up.
26
Instruments & Controls
Engine Stop Switch
RIGHT HANDLEBAR
page
50
.
(1) start button
(2) engine stop switch
The engine stop switch ( ) is used to stop
the engine in an emergency. To operate,
push the switch to the OFF position. The
switch must be in the RUN position to
start the engine, and it should normally
remain in the RUN position even when the
engine is OFF.
(2)
(1)
OFF
RUN
2