Gauges, Indicators & Displays
Lamp Check
The PGM-FI malfunction indicator lamp
lights for a few seconds and then goes off
when you turn the ignition switch ON.
When applicable, the high beam indicator
comes on when you turn the ignition
switch ON and remains on until you select
the low beam.
If this indicator does not come on when it
should, have your Honda dealer check for
problems.
The indicator is identified in the table on
page
with the words:
18
14
Instruments & Controls
Lamp Check.
Meter Check
The speedometer needle will swing to the
maximum scale on the dial once when you
turn the ignition switch ON.
The meter is identified in the table on
page
with the words:
17
If the speedometer needle does not swing
to the maximum scale on the dial when it
should, have your Honda dealer check for
problems.
Meter Check.