Accessory Drive Belt Inspection - Chrysler 300 2018 Owner's Manual

Hide thumbs Also See for 300 2018:

Table of Contents

A/C Air Filter

5. Close the filter access cover.

Refer to "Scheduled Servicing" in this section for the

proper maintenance intervals.

Accessory Drive Belt Inspection

• Do not attempt to inspect an accessory drive belt

with vehicle running.

• When working near the radiator cooling fan, discon-

nect the fan motor lead. The fan is temperature

controlled and can start at any time regardless of

ignition mode. You could be injured by the moving

• You can be badly injured working on or around a

motor vehicle. Only do service work for which you

have the knowledge and the proper equipment. If

you have any doubt about your ability to perform a

service job, take your vehicle to a competent me-

When inspecting accessory drive belts, small cracks that

run across ribbed surface of belt from rib to rib, are

considered normal. These are not a reason to replace belt.

However, cracks running along a rib (not across) are not

SERVICING AND MAINTENANCE 355

WARNING! (Continued)

Table of Contents