Chrysler 300 2018 Owner's Manual page 21

Hide thumbs Also See for 300 2018:
Table of Contents

Advertisement

To Unlock The Doors
Unlock The Doors
Push and release the unlock button on the key fob once to
unlock the driver's door or twice within five seconds to
unlock all doors.
The turn signal lights will flash to acknowledge the unlock
signal. The illuminated entry system will also be activated.
NOTE: All door unlock settings can be programmed to
your convenience through Uconnect Settings. Refer to
"Uconnect Settings" in "Multimedia" for further informa-
tion.
• Unlock the driver door on the first push of the key fob
unlock button.
• Unlock all doors on the first push of the key fob unlock
button.
NOTE: To unlock doors and trunk with passive entry,
Refer to "Keyless Enter-N-Go — Passive Entry" located in
"Doors" in "Getting To Know Your Vehicle" for further
information.
GETTING TO KNOW YOUR VEHICLE 19
NOTE: When you use the key fob to open any door, the
courtesy lights, overhead lights, and approach lighting in
the outside mirrors (if equipped) will turn on. Refer to
"Interior Lights" in "Getting To Know Your Vehicle" for
further information
1st Press Of Key Fob Unlocks
This feature lets you program the system to unlock either
the driver's door or all doors on the first push of the unlock
button on the key fob.
To change the current setting, refer to "Uconnect Settings"
in "Multimedia" for further information.
Flash Lights With Lock
This feature will cause the turn signal lights to flash when
the doors are locked with the key fob. This feature can be
turned on or turned off. To change the current setting, refer
to "Uconnect Settings" in "Multimedia" for further infor-
mation.
3

Advertisement

Table of Contents
loading

Table of Contents