Adaptive Cruise Control (Acc) Operation; Activating Adaptive Cruise Control (Acc) - Chrysler 300 2018 Owner's Manual

242 STARTING AND OPERATING

Adaptive Cruise Control (ACC) Operation

The Speed Control buttons (located on the right side of the
steering wheel) operates the ACC system.
Adaptive Cruise Control Buttons
1 — Normal (Fixed Speed)
Cruise Control On/Off
2 — SET+/Accel
3 — RES/Resume
4 — SET-/Decel
5 — Distance Setting Increase
6 — Adaptive Cruise Control
(ACC) On/Off
7 — Distance Setting Decrease
8 — CANC/Cancel
NOTE: Any chassis/suspension or tire size modifications
to the vehicle will effect the performance of the Adaptive
Cruise Control and Forward Collision Warning System.

Activating Adaptive Cruise Control (ACC)

You can only engage ACC if the vehicle speed is above
0 mph (0 km/h).
The minimum set speed for the ACC system is 20 mph
(32 km/h).
When the system is turned on and in the ready state, the
instrument cluster displays "ACC Ready."
When the system is off, the instrument cluster displays
"Adaptive Cruise Control (ACC) Off."
NOTE: You cannot engage ACC under the following con-
ditions:
• When in Four-Wheel Drive Low.
• When you apply the brakes.
• When the parking brake is applied.
• When the automatic transmission is in PARK, REVERSE
or NEUTRAL.
• When the vehicle speed is outside of the speed range.