Speed Control - If Equipped - Chrysler 300 2018 Owner's Manual

236 STARTING AND OPERATING
Alternate electric power steering efforts can be selected
through the Uconnect System. Refer to "Customer Pro-
grammable Features" within "Uconnect Settings" in "Mul-
timedia" for further information.
If the Electric Power Steering warning icon is
displayed and the "SERVICE POWER STEER-
ING" or the "POWER STEERING ASSIST OFF –
SERVICE SYSTEM" message is displayed within
the instrument cluster display, this indicates the vehicle
needs to be taken to the dealer for service. Refer to
"Warning Lights And Messages" in "Getting To Know
Your Instrument Panel" for further information.
NOTE:
• Even if the power steering assistance is no longer
operational, it is still possible to steer the vehicle. Under
these conditions there will be a substantial increase in
steering effort, especially at low speeds and during
parking maneuvers.
• If the condition persists, see your authorized dealer for
service.
If the Steering icon is displayed and the "POWER STEER-
ING SYSTEM OVER TEMP" message is displayed on the
instrument cluster screen, they indicate that extreme steer-
ing maneuvers may have occurred which caused an over
temperature condition in the power steering system. Once
driving conditions are safe, pull over and let the vehicle
idle for a few moments until the icon and message turn off.
SPEED CONTROL — IF EQUIPPED
When engaged, the Speed Control takes over accelerator
operations at speeds greater than 25 mph (40 km/h).
The Speed Control buttons are located on the right side of
the steering wheel.