Chrysler 300 2018 Owner's Manual page 308

306 IN CASE OF EMERGENCY
7. Install the headlamp bulb cap in the headlamp housing
and rotate it clockwise to lock it.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
Front Turn Signal Lamps
1. Open the hood.
Headlamp Assembly Location
NOTE: Removal of the air cleaner filter housing may be
necessary prior to replacing bulbs in the headlamp assem-
bly on the driver side of the vehicle.
2. Reach behind the headlamp housing to access the turn
signal (inboard) bulb cap.
3. Firmly grasp the cap and rotate it counterclockwise to
unlock it.
Headlamp Assembly
4. Squeeze the two tabs on the side of the bulb socket and
pull straight out from the lamp assembly.