To Activate; To Set A Desired Speed - Chrysler 300 2018 Owner's Manual

Speed Control Buttons
1 — On/Off
2 — SET+/Accel
3 — RES/Resume
NOTE: In order to ensure proper operation, the Speed
Control System has been designed to shut down if multiple
Speed Control functions are operated at the same time. If
this occurs, the Speed Control System can be reactivated by
pushing the Speed Control on/off button and resetting the
desired vehicle set speed.
4 — SET-/Decel
5 — CANC/Cancel

To Activate

Push the on/off button to activate the Speed Control.
"CRUISE CONTROL READY" will appear in the instru-
ment cluster display to indicate the Speed Control is on. To
turn the system off, push the on/off button a second time.
"CRUISE CONTROL OFF" will appear in the instrument
cluster display to indicate the Speed Control is off. The
system should be turned off when not in use.
WARNING!
Leaving the Speed Control system on when not in use
is dangerous. You could accidentally set the system or
cause it to go faster than you want. You could lose
control and have an accident. Always leave the system
OFF when you are not using it.

To Set A Desired Speed

Turn the Speed Control on. When the vehicle has reached
the desired speed, push the SET (+) or SET (-) button and
release. Release the accelerator and the vehicle will operate
at the selected speed. Once a speed has been set, a message
"CRUISE CONTROL SET TO MPH (km/h)" will appear
STARTING AND OPERATING 237
6