Power Tilt/Telescoping Steering Column - If Equipped - Chrysler 300 2018 Owner's Manual

Hide thumbs Also See for 300 2018:
Table of Contents

Advertisement

push it inward as desired. To lock the steering column in
position, push the lever upward until fully engaged.
WARNING!
Do not adjust the steering column while driving.
Adjusting the steering column while driving or driv-
ing with the steering column unlocked, could cause the
driver to lose control of the vehicle. Failure to follow
this warning may result in serious injury or death.
Power Tilt/Telescoping Steering Column — If
Equipped
This feature allows you to tilt the steering column upward
or downward. It also allows you to lengthen or shorten the
steering column. The power tilt/telescoping steering col-
umn switch is located below the multifunction lever on the
steering column.
GETTING TO KNOW YOUR VEHICLE 55
Power Tilt/Telescoping Steering Switch
To tilt the steering column, move the switch up or down as
desired. To lengthen or shorten the steering column, pull
the switch toward you or push the switch away from you
as desired.
NOTE: For vehicles equipped with Driver Memory Seat,
you can use your remote keyless entry key fob or the
memory switch on the driver's door trim panel to return
the tilt/telescopic steering column to pre-programmed
positions. Refer to "Driver Memory Seat" in this section.
3

Advertisement

Table of Contents
loading

Table of Contents