To Activate; To Set A Desired Speed; To Vary The Speed Setting - Chrysler Pacifica Hybrid 2018 User Manual

To Activate

Push the on/off button to activate the Speed Con-
trol. The cruise indicator light in the instrument
cluster display will illuminate. To turn the system off,
push the on/off button a second time. The cruise
indicator light will turn off. The system should be
turned off when not in use.
WARNING!
Leaving the Speed Control system on when not
in use is dangerous. You could accidentally set
the system or cause it to go faster than you want.
You could lose control and have an accident.
Always leave the system off when you are not
using it.

To Set A Desired Speed

Turn the Speed Control on.
NOTE:
The vehicle should be traveling at a steady speed
and on level ground before pushing the SET (+) or
SET (-) button.
148
When the vehicle has reached the desired speed,
push the SET (+) or SET (-) button and release.
Release the accelerator and the vehicle will operate
at the selected speed.

To Vary The Speed Setting

To Increase Speed
When the Speed Control is set, you can increase
speed by pushing the SET (+) button.
The driver's preferred units can be selected through
the Uconnect system if equipped. The speed incre-
ment shown is dependent on the chosen speed unit
of U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Pushing the SET (+) button once will result in a
1 mph increase in set speed. Each subsequent tap
of the button results in an increase of 1 mph.
• If the button is continually pushed, the set speed
will continue to increase until the button is re-
leased, then the new set speed will be established.
Metric Speed (km/h)
• Pushing the SET (+) button once will result in a
1 km/h increase in set speed. Each subsequent tap
of the button results in an increase of 1 km/h.
• If the button is continually pushed, the set speed
will continue to increase until the button is re-
leased, then the new set speed will be established.
To Decrease Speed
When the Speed Control is set, you can decrease
speed by pushing the SET (-) button.
The driver's preferred units can be selected through
the Uconnect system if equipped. The speed incre-
ment shown is dependent on the chosen speed unit
of U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Pushing the SET (-) button once will result in a
1 mph decrease in set speed. Each subsequent tap
of the button results in a decrease of 1 mph.
• If the button is continually pushed, the set speed
will continue to decrease until the button is re-
leased, then the new set speed will be established.
Metric Speed (km/h)
• Pushing the SET (-) button once will result in a
1 km/h decrease in set speed. Each subsequent tap
of the button results in a decrease of 1 km/h.
• If the button is continually pushed, the set speed
will continue to decrease until the button is re-
leased, then the new set speed will be established.