Calibrating The Remote Control Screen; Setting The Clock - Pioneer VSX-59TXi Elite Operating Instructions Manual

Before you start
01
There are three remote setup menu screens, which
can be navigated by using the touch panel
(cursor left/right) soft keys:
SETUP
CALIBRATE
PRESET RECALL
LEARNING
MULTI OPERATION
DIRECT FUNCTION
• For more on navigating the remote control menu
screens, see Basic remote control displays on
page 33.

Calibrating the remote control screen

This will make sure the remote control responds correctly
when you touch it.
1 Press CALIBRATE.
2 Press the center of each cross point to align the
touch screen with the LCD panel underneath.
This adjustment will make sure your remote control is
calibrated correctly.
When you've touched both cross points, PLEASE WAIT is
displayed and you'll return to the remote setup menu
when calibration is finished.
10
En
1/3 SETUP
CLOCK DISPLAY : AM/PM
CLOCK SETTING
BEEP :
TIMEOUT
KEY LABEL
SETUP 1/3
CALIBRATE
PRESET RECALL
LEARNING
MULTI OPERATION
DIRECT FUNCTION
PLEASE TOUCH
THE UPPER "+" MARK
"MUTE": CANCEL

Setting the clock

The remote control features a clock that shows both 12
and 24 hour formats.
1 Press CLOCK DISPLAY to select either AM/PM or
24H display format.
2/3
Each press switches between the two settings. The
current display format is shown after CLOCK DISPLAY.
2 Press CLOCK SETTING to set the date.
Use the + and – buttons to set the year, month and day.
SETUP
CLOCK DISPLAY : AM/PM
CLOCK SETTING
BEEP :
TIMEOUT
KEY LABEL
3 Press NEXT to continue and set the time.
Use the + and – buttons to set the hour and minute.
4 Press ENTER when you're finished.
You'll return to the remote setup menu.
SETUP 2/3
CLOCK DISPLAY : AM/PM
CLOCK SETTING
BEEP :
TIMEOUT
KEY LABEL
2/3
DATE
+ +
2003 /10 /09
- -
NEXT CANCEL
TIME 2/2
+ +
17 : 08
- -
ENTER CANCEL
1/2
+
-