Quick Setup - Pioneer VSX-45TX Elite Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for VSX-45TX Elite:
Table of Contents

Advertisement

Setting Up for Surround Sound

QUICK setup

This simple and quick setup method allows you to make all the necessary settings manually with the minimum
of hassle. If you did the AUTO SURROUND SOUND SETUP method on pages 13-15 you don't need to do this
setup. You must have front and surround speakers hooked up to use this setup.
You only need to do these settings once (unless you change the placement of your current speaker system or
add new speakers, etc.). If starting fresh, complete steps 1–3 in page 36.
VIDEO SEL
9
SYSTEM SETUP
MENU
TUNER EDIT
AUDIO
MPX
TUNING
1
1-4
STANDBY/ON
MOVIE
MUSIC
ENTER
MULTI JOG
1
1.Surround Setup
[ SurrBack System ]
[ Auto Setting
[
Quick
[ Normal
[ Expert
[ Exit
2
QUICK
Subwoofer
Center SP
SurrBack SP
Room size
Listening Position
[Exit]
4
QUICK
Subwoofer
Center SP
SurrBack SP
Room size
Listening Position
[Exit
]
If you do the QUICK setup after
memo
the AUTO SURROUND SOUND
SETUP the former will replace the
latter.
38
+
HI-BIT
10
DISC
0
ENTER
DIRECT ACCESS SEARCH MODE
GUIDE
TOP MENU
1-4
TRACK
ENTER
EXIT
RETURN
DTV ON/OFF
DISP MODE
8
SUB TITLE
+
BAND
TUNING
3
¡
STANDBY
MULTI JOG CONTROL
SIGNAL
HI-BIT
SB CH
SET UP
RETURN
SELECT
HI-SAMPLING
MODE
BAND
TONE CONTROL
PHONES
SPEAKERS
TONE
BASS/TREBLE
]
]
]
]
]
[ YES
]
[ YES
]
[ YES
]
[
Medium ]
[ Center ]
[ YES
]
[ YES
]
[ YES
]
[
Small
]
[ Front
]
1 Use the 5∞ buttons to select QUICK.
Press the ENTER button.
The setup possibilities appear on your TV.
2 Use the 5∞ buttons to navigate
through the QUICK setup menus. When
you get a menu you want to adjust
press ENTER.
3 In a menu use the 5∞ buttons to select
the different settings. When you have
the setting you want in a particular
menu, press ENTER.
Make the adjustments that match your home setup
using the buttons described above.
SUBWOOFER setting:
If you connected a subwoofer select YES, if you didn't
select
NO.
CENTER SP setting:
If you connected a CENTER speaker select YES, if you
didn't select NO.
SURRBACK SP setting:
If you connected a SURROUND speaker(s) select YES, if
you didn't select NO.
ROOM SIZE setting:
Tell the receiver your room size so it can equalize the
speakers properly. Use the chart below for an approximate
definition of the settings.
SMALL: 12 feet by 15 feet
MEDIUM: 18 feet by 20 feet
LARGE: 25 feet by 30 feet
LISTENING POSITION setting:
This setting establishes where your ideal listening position
is. Choose from the three possibilities following the guide
below.
FRONT: your listening position is closer to the front
speakers.
CENTER: your listening position is equidistant to the
front and surround speakers.
REAR: your listening position is closer to the surround
speakers.
4 Use the 5∞ buttons to select the EXIT.
Press the ENTER button.
You will return to the SURROUND SETUP menu display.
If you want to change a setting before proceeding
start over from step 1.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite vsx-45tx

Table of Contents