Multi Operations - Pioneer VSX-45TX Elite Operating Instructions Manual

Using Other Functions

Multi Operations

Multi operations allow you to tell the receiver and your other components to do a number of things with the
push of only two buttons on the remote control (see "Performing Multi Operations" on the next page). For
example, you can program the unit to turn on your TV, turn on your DVD player and start playing the loaded
DVD. This allows you to freely decide which operations you want performed as well as the order in which you
want them performed. The steps below show you how to program a string of up to 5 different operations for
each MULTI CONTROL button. You don't need to program the power of this receiver (or any Pioneer
component used) to go on, it (or they) will do so automatically when multi operations are performed.
Be sure to set up each component before programming multi operations (see "Setting Up the
memo
Remote Control to Control Other Components", pages 62–65).
3,6
SYSTEM SETUP
2,4,5
memo
• To exit from the REMOTE SETUP mode at
anytime press the REMOTE SETUP button.
• The display will disappear after one minute or
so if no new commands are entered. Press any
button to wake up the remote and continue the
process.
80
SETUP
S0URCE TV SYSTEM RECEIVER
OFF
VCR1/
DVD/LD TV/SAT TV CONT
DVR
MULTI CONTROL
MULTI
VCR2 VIDEO CD
OPERATION
CD-R/ MD/
TUNER RECEIVER
TAPE1 TAPE2
DIMMER LOUDNESS TONE EFFECT/CH SEL
1 2 3 4
+
SIGNAL SEL DNR BASS/TREBLE
5 6 7 8
–
+
VIDEO SEL HI-BIT 10
DISC
9 0
ENTER
DIRECT ACCESS SEARCH MODE
GUIDE
MENU TOP MENU
7
TUNER EDIT TRACK
ENTER
EXIT
AUDIO RETURN
Buttons that
MPX
DTV ON/OFF DISP MODE
¶ 8
SUB TITLE
can be
– +
TUNING BAND TUNING
1 3 ¡
programmed
– +
STATION DTV MENU CLASS STATION
4 7 ¢ with Multi
– +
CHANNEL CHANNEL
Operations
TV INPUT INPUT
TV CONTROL
TV VOL MIDNIGHT VOLUME
TV CH
MULTI CH
INPUT
ACOUSTIC
MOVIE MUSIC MUTE
EQ
MODE
SURROUND
REMOTE
1
SETUP
STEREO/ SB CH
ENTER
DIRECT MODE
Î
1 Press the REMOTE SETUP button for
more than three seconds.
The REMOTE SETUP menu appears on the remote
display.
2 Use the 5∞ buttons to select MULTI
OPE and press ENTER.
SELECT FUNCTION blinks on the remote display.
3 Press the MULTI CONTROL button
for the component you want to start
the MULTI OPERATIONS with.
MULTI OPE appears in the display.
For example, DVD/LD
4 Use the 5∞ buttons to select first
command. "1st Cmmnd" appears in
the display. Press ENTER.
This tells the receiver this will be the first command.
To erase a command
Select CLEAR and press ENTER. Then go to step 8.
To go back one step
Select EXIT and press ENTER.
5 To setup a command select CHANGE
and press ENTER.
FUNCTION flashes in the display,
6 Select the component whose
command you want to input (for
example, a DVD player), and press
the MULTI CONTROL button for it.
KEY will flash in the display.
7 Select a button for the command you
want to input (for example, 3 [play]).
COMPLETE appears in the display.
8 Repeat steps 4-7 to program a
sequence of up to five commands.
You can assign MULTI OPERATIONS for up to 5
commands for each MULTI CONTROL button.