Using The Quick Setup - Pioneer VSX-D512 Operating Instructions Manual

5 minute guide

Using the Quick Setup

You can use the Quick Setup to get your system
up and running with just a few button presses.
The receiver automatically makes the necessary
settings after you have selected your speaker
setup and room size. If you want to make more
specific settings, refer to Choosing your receiver
setup on pages 31 to 35. Use the front panel
controls for the steps below.
T LOUDNESS TONE QUICK SETUP
T LOUDNESS TONE QUICK SETUP
DOWN
DOWN
MULTI JOG
MULTI JOG
1 Press STANDBY/ON to turn the
power on.
The STANDBY indicator goes out.
2 Press QUICK SETUP.
The display prompts you to select your speaker
setup.
3 Use the MULTI JOG/INPUT SELECTOR
dial to choose your speaker setup.
Cycle between the following choices:
5.1ch
3.0ch
3.1ch
INPUT
INPUT
SELECTOR
MULTI JOG
MULTI JOG SELECTOR
ENTER
ENTER
MASTER VOLUME
MASTER VOLUME
UP
UP
5.0ch
4.1ch
4.0ch
Check the table below to find the speaker
setup that corresponds with your system.
Front Center
Speakers Speaker
√ √
3.0 ch
√ √
3.1 ch
√
4.0 ch
√
4.1 ch
√ √
5.0 ch
√ √
5.1 ch
4 Press ENTER.
The display prompts you to select your room
size.
5 Use the MULTI JOG/INPUT SELECTOR
dial to choose your room size.
Depending on the distance of your surround
speakers, choose between Small, Medium, or
Large (see table below).
S
3.6 m
Front
3.0 m
Center
1.8 m
Surround
6 Press ENTER to confirm your setup.
The display shows the speaker setup and room
size that you have selected.
Surround Sub
Speakers Woofer
√
√
√ √
√
√ √
M L
3.6 m 3.6 m
3.0 m 3.0 m
2.1 m 2.7 m
02
11
En