Basic Security Settings - Verizon TG790 Setup And User Manual

4 GUI: Wireless Settings
4.2

Basic Security Settings

Introduction
The Basic Security Settings page allows you to configure the basic wireless settings
of your HSG in a step-by-step approach.
Overview of the steps
This section describes:
Step 1: Turn Wireless ON/OFF
Step 2: Change the SSID setting to any name or code you want
Step 3: Channel
Step 4: Click on the button next to WEP
Step 5: Select a WEP Key
Step 6: Turn WPS ON
Step 7: Write down wireless settings
Step 1: Turn Wireless ON/OFF
If you are not using your wireless connection, you might consider to turn it off.
Make sure that nobody is using the wireless connection before turning it off.
Step 2: Change the SSID setting to any name or code you want
If you want to change the default network name of your wireless network, type the
new network name in the SSID box.
Step 3: Channel
If you want to change the channel for your wireless communication, select a new
channel in the Channel list.
We recommend you to use Automatic (this is also the default). When Automatic is
selected the HSG will choose the channel that has the least interference. Only
change it if you experience wireless connectivity problems.
32 DMS-CTC-20110909-0007 v0.1