10.2 Troubleshooting Your Wireless Connection - Verizon TG790 Setup And User Manual

10.2 Troubleshooting Your Wireless Connection

Windows can not find the HSG access point
If the built-in Windows wireless client manager can not find your HSG access point:
If you are using a laptop, check if your laptop has a button to enable/disable the
wireless client. Switch it on and try again.
Make sure your computer is within range.
Make sure that wireless is enabled on your HSG:
a Take a computer that is connected to the HSG or connect your computer with
an Ethernet cable (for more information, see
HSG" on page
b Browse to the GUI. For more information, see
c On the Wireless Settings menu, click Basic Security Settings.
d Under 1. Turn Wireless ON, select On.
e Click Apply.
Change the wireless channel:
a Take a computer that is connected to the HSG or connect your computer with
an Ethernet cable (for more information, see
HSG" on page
b Browse to the GUI. For more information, see
c On the Wireless Settings menu, click Basic Security Settings.
d Under 3. Channel, select another channel.
e Click Apply.
Poor wireless connectivity
Try the following:
Change the wireless channel:
a Take a computer that is connected to the HSG or connect your computer with
an Ethernet cable (for more information, see
HSG" on page
b Browse to the GUI. For more information, see
c On the Wireless Settings menu, click Basic Security Settings.
d Under 3. Channel, select another channel.
e Click Apply.
Check the signal strength, indicated by the wireless client manager. If the signal is
low, try to move the HSG for optimal performance.
DMS-CTC-20110909-0007 v0.1
18).
18).
18).
10
"2.3.2 Wired Connection to the
"Accessing the GUI" on page
"2.3.2 Wired Connection to the
"Accessing the GUI" on page
"2.3.2 Wired Connection to the
"Accessing the GUI" on page
Support
20.
20.
20.
91