Multi-Cd Player; Basics - Pioneer Super Tuner III D AVM-P9000 Owner's Manual

Multi-CD Player

Basics

Selecting the Multi-CD Player
Select the "Multi-CD" as source by
pressing the SOURCE button as many
times as necessary.
The player starts playing automatically.
Track Search and Fast Forward/Reverse
You can select between Track Search or Fast Forward/Reverse by pressing the 2/3
button for a different length of time.
Track Search
Fast Forward/Reverse
Note:
• The Multi-CD player may perform a preparatory operation, such as verifying the presence of a
disc or reading disc information, when the power is turned ON or a new disc is selected for play-
back. "READY" is displayed.
• If the Multi-CD player cannot operate properly, an error message such as "ERROR-14" is dis-
played. Refer to the Multi-CD player owner's manual.
• If there are no discs in the Multi-CD player magazine, "NO DISC" is displayed.
33
Disc Number Search (for 6-Disc, 12-Disc types)
DISP
RTN
Disc Search
You can select discs directly with the 1 to 6 but-
tons. Just press the number corresponding to
the disc you want to listen to.
Note:
• When a 12-Disc Multi-CD Player is connected and
you want to select disc 7 to 12, press the 1 to 6 but-
tons for 2 seconds.
Less than 0.5 seconds
Continue pressing
Track Number
Disc Number
Play Time