Connecting The Power Cord - Pioneer Super Tuner III D AVM-P9000 Owner's Manual

Connecting the Power Cord

Red
To electric terminal controlled by
ignition switch (12V DC) ON/OFF.
Black (ground)
To vehicle (metal) body.
Yellow
To terminal always supplied with power
regardless of ignition switch position.
Orange
To lighting switch terminal.
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
81
Parking brake switch
Power supply side
Ground side
Fuse holder
Extension lead
Light green
Used to detect the ON/OFF status of the parking
brake. This lead must be connected to the power
supply side of the parking brake switch.
Connection method
Clamp the parking
brake switch power
supply side lead.
Note:
• The position of the parking brake switch
depends on the vehicle model. For details,
consult the vehicle Owner's Manual or dealer.
Red
Precaution:
• Be sure to use the supplied
accessory extension lead.
Fuse holder
Fuse resistor
Clamp firmly with
needle-nosed pliers.