Adjusting The Speakers' Output Level - Pioneer Super Tuner III D AVM-P9000 Owner's Manual

4. Select "Frequency", "EQ Level" or "Q
Factor" by moving the joystick up/down.
Selected option is highlighted in green.
5. Adjust the selected option by moving the joy-
stick left/right.
The selectable options are adjustable in the following
limits:
Option
Frequency
EQ Level
Q Factor
Note:
• The Front Left and Right speakers cannot be adjusted differently. The same is true for the
Rear Left and Right. When you make adjustment to either of the pair, the other is automatical-
ly set to the same position.
6. Select "Band" by moving the joystick up.
7. Repeat steps 3 – 6 for the selected band.
8. Complete the setting by clicking the joystick.
9. Repeat steps 1 – 8 for other speakers.

Adjusting the Speakers' Output Level

You can readjust the speakers' output levels once adjusted using a test tone while hearing
music this time.
1. Select a speaker by moving the joystick.
The currently selected speaker is highlighted in green.
2. Click the joystick.
You are ready to make adjustments to the selected
speaker. "Band" is highlighted in green.
Adjustable Range
100 Hz – 8 kHz
–12 dB – +12 dB
WIDE/NARROW
Continued overleaf.
62