User's Manual Permobil M5 Corpus
Leg rest length
The leg rest length can be adjusted continuously and secured using
two locking screws.
1. Remove the leg rest cover.
2. Undo the leg rest's two inner locking screws.
3. Adjust the leg rest to the required length and secure by
tightening the locking screws.
4. Check that the leg rest is fully secured.
5. Re-fit the leg rest cover.
WARNING!
Risk of injury – adjust floor-to-footplate
clearance
After adjustment, and with the seat lift in its lowest position, make sure there
is sufficient clearance, at least 1 inch, between the ground and the
footplate at all times when moving the leg rest in or out. Perform this test
with the user sitting in the wheelchair with his or her feet on the footplates.
Settings and adjustments
Figure 20. Adjustment screws for leg rest length.
67