Storing Memory - Permobil M5 Corpus User Manual

User's Manual Permobil M5 Corpus

Storing memory

Before storing a seating position in memory, configure the seat
system in the desired position.
1. Enter memory mode by pressing and holding the memory
button (8) for two seconds. While in the memory mode, the
LED flashes green.
2. Press and hold button (4) until the LED immediately to the left
of the Memory LED lights up green. Memory is now enabled
and ready to memorize a seat position.
3. Press and hold the desired Store button (5, 6 or 7) for three
seconds to memorize the current seat position. The LED above
the memory position will light up red and the control panel will
beep once the memory is successfully stored.
4. Return to standard seat function operating mode by pressing the
Memory button (8).
ICS seat control panel
Figure 127. Memory function.
157