Paired Devices; Making A Home Call Using Your Landline; Making A Cellular Call Using Your Cordless Dect Handset; Speed Dial Calling - Motorola L702BT User Manual

Doc Title : Product Data – User's Guide
Model : Motorola L70×BT
․
Press <MENU> to confirm. Display will show REPLACE THE CELLULAR?
․
Press <MENU> to confirm. Display will show CELLULAR READY.
․
Refer to section 3.2.1 to proceed with the next steps.
NOTE
When pairing a new cellular, the connected cellular will be disabled temporarily.

3.2.3 Paired devices

The cellular(s) paired up will be displayed in the paired devices list, no matter it(they) is(are) connected or not. You
can choose to connect, or remove the cellular from this menu.
1. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select BLUETOOTH.
2. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select PAIRED DEVICES.
3. Display will show the cellular name(s) of paired device(s).
NOTE
Display will show NO PAIRED DEVICE if there is no device paired up.
4. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select the desired cellular device.
For connected cellular device:
5. Press <MENU> to remove the cellular device.
6. Press <MENU> to confirm.
For the cellular phone that is not connected:
5. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select CONNECT or REMOVE CELLULAR.
6. Press <MENU> to confirm. If you select REMOVE CELLULAR, press <MENU> again to confirm.
NOTE
․
When the connected cellular is removed, corresponding device 1 or 2 will be off.
․
When the disconnected cellular is connected, corresponding device 1 or 2 will be on.
․
When the cellular is removed, the device name will be removed and EMPTY will be displayed instead in the
paired device list.

3.3 Making a home call using your landline

1. Enter the phone number and press <HOME> or <SPEAKER> to dial the phone number.

3.4 Making a cellular call using your cordless DECT handset

If there is only one Bluetooth enabled mobile phones paired up and connected,
1. Enter the phone number, and then press <CELLULAR> to dial out.
If there are two Bluetooth enabled mobile phones paired up and connected,
1. Enter the phone number, press <CELLULAR> and then <VOL+> or <REDIAL/VOL-> to select the desired
cellular device.
2. Press <CELLULAR> to dial out.
NOTE
If the cellular device is paired up but not connected, you should connect the cellular device before making an
external Bluetooth call.

3.5 Speed dial calling

1. Press and hold a key from <1> to <9> until the number is displayed and dialed.

3.6 Answering a home call

1. Press <HOME> or <SPEAKER> to answer the incoming home call.

3.7 Answering a cellular call

1. Press <CELLULAR> or <SPEAKER> to answer the incoming cellular call.

3.8 Receiving a cellular call while on a home call

A short beep during a HOME call indicates that there is an incoming CELLULAR call and the screen will display the
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
R.00
14 of 27