Overview Of The Base; Using The Phone; Introducing Bluetooth - Motorola L702BT User Manual

Doc Title : Product Data – User's Guide
Model : Motorola L70×BT

2.3 Overview of the base

5
1 CHARGING LED-GREEN
a) Steadily on when the handset is put into base cradle for charging.
2 IN USE LED-RED
a) Steadily on: During a call or when an extension phone is engaged or the built-in answering machine is off
hook.
b) Flashing at a rate similar to the incoming ring pattern: During an incoming call.
c) Flashing briefly on and off for 2 minutes: During paging or registration.
3 CELL 1 LED-BLUE
a) Steadily on when Bluetooth device #1 is paired and connected to the base.
b) Flashes when Bluetooth device #1 is in the pairing up process.
c) Off when Bluetooth device #1 is disconnected.
4 CELL 2 LED-BLUE
a) Steadily on when Bluetooth device #2 is paired and connected to the base.
b) Flashes when Bluetooth device #2 is in the pairing up process.
c) Off when Bluetooth device #2 is disconnected.
5 FIND
a) Press to find/page all registered handsets. Press the button again, or any key on the handset, to turn off page
signal.
b) Press and hold to enter registration mode.
Base LED indicators
7-SEG LED DISPLAY
-- Answering machine is OFF.
00 There is no voice message in the answering machine.
09 Flash in idle: Indicates the number of new answering machine messages. (e.g. there are 9 answering machine messages
in total, with a capacity for 59.)
Steadily On: All the new messages have been listened to and there are 9 answering machine messages in total.
FF Flashing: The memory of the answering machine is full.
An/09 Flashing: Indicates an incoming call / recording of an incoming call. The number (e.g. 09) indicates the total number of
new messages.
LA Flashing: Indicates the handset or line remote access is in progress.
3

USING THE PHONE

3.1 Introducing Bluetooth

Your new telephone system with Bluetooth wireless technology has the following features:
․
Pairing a Bluetooth enabled mobile phone with the telephone base. Two Bluetooth devices can be paired up
and connected.
․
Connecting a Bluetooth enabled mobile phone to make and receive CELLULAR calls. Two mobile phones can
be connected but only one of them can be used at a time.
․
Making and receiving calls using your Bluetooth enabled mobile phone plan while benefiting from the ease and
comfort of your home telephone system.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
1
2
3
4
R.00
12 of 27