The System Setup Menu; Making Receiver Settings From The System; Setup Menu; Surround Back Speaker Setting - Pioneer 915 Operating Instructions Manual

The System Setup menu

Chapter 7:
The System Setup menu
Making receiver settings from
the System Setup menu
The following section shows you how to make
detailed settings to specify how you're using
the receiver (for example, if you want to set up
two speaker systems in separate rooms), and
also explains how to fine-tune individual
speaker system settings to your liking.
INPUT
RECEIVER SOURCE
SELECT
DVD/LD TV/SAT DVR/VCR TV CONT
MULTI CONTROL
CD CD-R/TAPE TUNER RECEIVER
1 If the receiver is off, press
RECEIVER to turn the power on.
• If headphones are connected to the
receiver, disconnect them.
2 Press RECEIVER on the remote control,
then press the SYSTEM SETUP button.
• Press SYSTEM SETUP again at any time to
exit the System Setup menu.
3 Use (cursor left/right) to select the
setting you want to adjust then press ENTER .
Press RETURN to confirm and exit the current
menu.
• SB. SYSTEM – Specify how you are using
your surround back speakers (see
Surround back speaker setting below).
FL DIMMER SR
DISC
10
ENTER
D.ACCESS CLASS
TOP MENU MENU
TUNE
ST ST
DTV MENU
ENTER
T.EDIT BAND
TUNE
SYSTEM
SETUP
GUIDE RETURN
TV CONTROL
INPUT
TV VOL TV CH VOL
SELECT
• A. MCACC – This is a quick and effective
automatic surround setup (see
Automatically setting up for surround
sound (MCACC) on page 12).
• M. MCACC – Fine tune your speaker
settings and customize the Acoustic
Calibration EQ (see Manual MCACC
speaker setup below).
• SP SETUP – Specify the size, number,
distance and overall balance of the
speakers you've connected (see Manual
speaker setup on page 48).
• IN ASSIG. – Specify what you've connected
to the digital and component video inputs
(see The Input Assign menu on page 66).
• OTHER – Make customized settings to
reflect how you are using the receiver (see
The Other setup menu on page 67).

Surround back speaker setting

• Default setting: SB NORM.
There are several ways you can use the
surround back speaker channels with this
system. In addition to a normal home theater
setup where they are used for the surround
back speakers, they can be used for bi-amping
the front speakers or as a separate speaker
system in another room.
1 Select ' SB. SYSTEM' from the System

Setup menu.

See Making receiver settings from the System
Setup menu above.
2 Select the surround back speaker setting.
• SB NORM. – Select for normal home
theater use with surround back speakers in
your main (speaker system A) setup.
07
43
En