Using the tuner
Tip
• To erase a station name, simply repeat
steps 1-3 and input four spaces instead of
a name.
• Once you have named a station preset, you
can press TUNER DISPLAY when listening
to a station to switch the display between
name and frequency.
Listening to station presets
You will need to have some presets stored to do
this. See Saving station presets above if you
haven't done this already.
1
Press TUNER to select the tuner.
2
Press CLASS to select the class in which
the station is stored.
Press repeatedly to cycle through classes A, B
and C.
3
Press ST +/– to select the station preset
you want.
• You can also use the number buttons on
the remote control to recall the station
preset.
08
53
En