Table of Contents
Advertisement
Problem
No sound is
audible.
PDT 8138 turns
itself off.
PDT8138
doesn't
recognize my
handwriting.
Tapping the
screen buttons
or icons does
not activate the
corresponding
feature.
P
D
T
8
Cause
Volume setting is low or
turned off.
PDT8138 is inactive.
Character strokes
written incorrectly with
the stylus.
Or
Character strokes
written on the wrong
part of the LCD screen.
Or
Lower-case and upper-
case letters, and
numbers written on the
wrong parts of the LCD
screen.
LCD screen not aligned
correctly.
1
0
0
S
Check the System Volume slider in the Sounds
& Reminders properties dialog box (under Start
> Settings) to make sure the volume is not
turned down.
Your PDT8138 turns off after a period of
inactivity. This period can be set from one to five
minutes, in one-minute intervals. Check the
Power dialog box (in the System tab under
Start > Settings), and change the setting if you
need a longer delay before the automatic shutoff
feature activates.
If you're using the Block Recognizer input
method, characters must be written a certain
way. See the PDT8100 Product Reference
Guide for Pocket PC 2002 for information about
how to write character strokes.
If you're using the Block Recognizer or Letter
Recognizer input method, make the character
strokes in the lower character entry area on the
screen—not on the display part of the screen.
Make sure you are writing letters and numbers in
the appropriate section of the writing area.
Align the screen. Choose Align Screen from the
System tab under Start > Settings, or hold
down the Function button and press the Action
button.
26
e
r
i
e
s
Solution
Advertisement
Table of Contents
