Table of Contents
Advertisement
P
Key
Alpha
Backlight
Caps/Shift
Clear
Cursor keys:
C, G, H, I
End
Enter/Escape
Power
Scan
Send
Space/Back-
space
D
T
8
1
Press Alpha to toggle between alpha and numeric mode. In
alpha mode, pressing a key produces the yellow letter on that
key; in another mode, pressing a key produces the number in
gray.
See Controlling the Backlight (Color TFT LCD) on page 13.
Press Shift when in alpha mode, then another key to capitalize
the letter on that key.
Press Func + Shift to toggle All Caps on and off. Func + Shift
also erases all entered data from the screen.
Press Clear to clear the screen.
Press cursor keys to move the cursor left, right, up and down on
the screen.
Press End to move the cursor to the end of a line.
Press Enter after entering data or a command.
Press Func + Enter to partially or completely escape from an
application level or screen.
See Starting the PDT 8138 on page 11.
Press Scan to scan bar codes. (Also use right and left scan
triggers.)
The Send key is application dependent.
Press Func + Bk-Sp to enter a blank space.
Press Bk-Sp to erase information entered on the display, one
character at a time
0
0
S
e
Action
15
r
i
e
s
Advertisement
Table of Contents
