Table of Contents
Advertisement
Using the 47-Key Keyboard
The 47-key keyboard uses an alphanumeric keypad that produces the 26-character alphabet
(A-Z), numbers (0-9), and assorted characters. The keyboard is color-coded to indicate which
modifier key (Alpha-Numeric, Func) to press to produce a particular character or action. The
keyboard default is the key value, producing the gray number or lower case yellow letter on
that key.
Key
Note: Press Func, then another key to produce the value or function above that key.
See individual key descriptions in this table for additional Function key usage.
Backlight
Caps/Shift
Clear
Cursor keys:
C, G, H, I
End
Enter/Escape
Power
P
D
T
8
1
See Controlling the Backlight (Color TFT LCD) on page 13.
Press Shift when in alpha mode, then another key to capitalize
the letter on that key.
Press Func + Shift to toggle All Caps on and off. Func + Shift
also erases all entered data from the screen.
Press Clear to clear the screen.
Press cursor keys to move the cursor left, right, up and down on
the screen.
Press End to move the cursor to the end of a line.
Press Enter after entering data or a command.
Press Func + Enter to partially or completely escape from an
application level or screen.
See Starting the PDT 8138 on page 11.
0
0
S
e
Action
16
r
i
e
s
Advertisement
Table of Contents
