Cisco TelePresence MX700 Installation Manual page 27

Installation guide for Cisco TelePresence MX700 Single camera - Wall mount
22
Mount loudspeakers
H
Two loudspeakers are preinstalled. Follow
steps 1-3 for the remaining eight loudspeakers.
Connect the cable to the loudspeaker. Use
1
the cable that is marked with the correct
loudspeaker position.
Enter the loudspeaker onto the speaker clip.
2
Make sure that no cables are pinched.
78-100254-03A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
The loudspeaker cables
are marked with a number.
These numbers must
match the position of the
loudspeakers, as shown
here.
Fasten with one screw.
3
8 × PT4x10 (one for each loudspeaker)
1
2
3
4
5
1
2
3
4
5
Page 27