Cisco TelePresence MX700 Installation Manual page 15

Installation guide for Cisco TelePresence MX700 Single camera - Wall mount
11
Lift and place right monitor onto lower frame
D
65 kg / 144 lb
Keep the monitor close to the wall so the
1 1
clamps on the rear side of the monitor slide
fully onto the top wall bracket.
Make sure that the screw with wing nut
enters the center slot on both sides.
Keep the outer side a bit lower than the
side toward the left monitor when lowering
the right monitor onto the lower frame.
Do not let go of the monitor before it is
securely placed on the lower frame.
78-100254-03A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Front view
Front view
Rear view
Rear view
Tighten the wing nuts
2
on both sides. They are
accessed from the sides
of the monitor.
Page 15