Event - EverFocus ECOR Series Instruction Manual

Timeout: Alarm output lasts for the set time duration.
Permanent: Alarm will continuously work until user presses ' ( key.
Transparent: Alarm output keeps working according to the signal of alarm input.
Trans+Timeout: Alarm output continues until event ends, then lasts for the set time duration.
$
No Change: No change on the main monitor display.
Full Screen: A full screen of the active camera will display.
< == 6 Check box to enable buzzer when an alarm occurs.
the boxes for each camera you wish to copy to, then click "OK" to copy settings. Click "Select All" to choose
all cameras. Click "Cancel" to cancel copy.
( ( !
This option covers internal system event warnings.
(
Fan Failure: Cooling fan stops working
HD Temperature: Hard drive is over the safety warning temperature
HD Failure: Hard drive not detected
HD Full: Hard drive reaches maximum capacity (by default, the DVR will begin overwriting the HD)
Downloaded from www.Manualslib.com
6 Output action when alarm is triggered.
6 Timeout duration selectable from 1 to 150 seconds.
$ 6 Display options on main monitor when an alarm occurs.
6 Check box to enable email notification function when an alarm occurs.
6 Press "Copy" button to copy the settings to other camera. This will bring up the copy window. Check
6 Select from the following event types.
manuals search engine
43