SMART enigma X5 User Manual page 17

Motor
If you connect receiver to DiSEqC1.2 or
DiSEqC1.3 antenna, set motorized system to
DiSEqC1.2 or USALS, Here press OK button to
enter motor system.
Position Auto [W/E]
Press / button, the dish will be
motorized to East/West continuously,
it will stop until it find the best signal.
Move Dish
Push / button, the dish will be motorized
to East/West step by step
until you find the best signal showed on the
signal bar.
Fine Tuning
Set the moving step.
Move Step
Move East or West step by step.
Limit Set
Disable or enable West limit or East limit
Store Position
Save the current position you searched.
Go to Position
Press OK button to move the dish to the
stored position.
Go to Reference
Press OK button to move the dish to
0 position.
Press EXIT after setup, and you can search
channel now.
17