7. Error Messages 3.The display will show the current surface temperature 7.1 Temperature Sensor Not Acclimated of the object within the measurement spot, ambient temperature, relative humidity and dew point temperature. After releasing the trigger the display will hold the current measurement. 4.The LED above the display will indicate the possible presence of mold.
1.The ambient temperature is either too high or too low 7.4 Internal Error for operation. 2.The instrument will show the above symbols. 3.Taking measurement in the current environment is not possible. 7.3 Surface Temperature outside Measureable Range 1.The instrument has encountered an internal error. 2.The instrument will show the above symbols.
Make sure that the target is larger than the unit’s visual 10. Thermal Bridge spot size; the smaller the target, the closer the A thermal bridge is any object that allows the transfer thermometer should be to it. The ratio between distance of heat or energy from one side to another.Because the and spot size is surface temperature of an object at a thermal bridge is...
Need help?
Do you have a question about the MS6530T and is the answer not in the manual?
Questions and answers