Use Other Equipment With Your Flat Panel Tv; Program The Remote Control To Operate Other Equipment; Use The Learning Feature - Pioneer Elite KURO PRO 111FD Operating Instructions Manual

Use Other Equipment With Your Flat Panel TV

05
5 Use Other Equipment With Your Flat Panel
TV
Although earlier sections have mentioned other equipment for playing back video, this section provides control
and operation information for specific types of equipment.

5.1 Program the Remote Control to Operate Other Equipment

To operate other equipment or devices through your flat panel TV, program the panel's remote control with the
equipment's Learning function or manufacturing code. A manufacturing code is a series of numbers that identify
the type of device and the brand. These codes are available in the section entitled "8.2 Manufacturer Codes to
Program into the Remote Control" in Appendix 8.2 of this manual.

5.1.1 Use the Learning Feature

The Learning function allows the panel's remote control to memorize other remote controls' codes.
To activate the Learning function follow the directions below.
1 ) Press SELECT to choose the device to learn.
2 ) Press EDIT/LEARN and 2 at the same time.
The selected mode indicator flashes when the remote control is
ready to be learned.
3 ) Use the number buttons to learn a manufacturing code.
The mode indicator lights up.
The Learn session is canceled in 30 seconds and the indicator
restarts blinking again. When the indicator flashes, the selected
device's remote is memorized. To exit the Learn mode before it
finishes, press
4 ) Press EDIT/LEARN again to exit the Lean mode.–
Note: The Learn session is canceled:
– if no operation is performed for more than one minute after
having pressed
flashing)
– if you press
– Code transmission finishes in approximately two seconds. Do not interrupt it until the transmission is
complete. Wait until the mode indicator flashes again. When using any of the receiver buttons (
or VOL+/–
78
En
2 cm to 5 cm (0.8 inches to 2.0 inches)
Remote control
(Supplied accessory)
EDIT/LEARN.
and (the mode indicator is
EDIT/LEARN 2
SELECT
), the learned manufacturer code remains the same.
Remote control of
AV product
1
4
7
SELECT
2 3
5 6
8 9
RECEIVER
VOL
INPUT
EDIT/LEARN
TV CBL DVD
RCV SAT VCR DVR
 , ,
INPUT