Hmg Setup - Pioneer Elite KURO PRO 111FD Operating Instructions Manual

Use Other Equipment With Your Flat Panel TV
05

5.10 HMG Setup

Use the HMG Setup option for Network Setup, Auto Connection Setup and Default Settings. For more information
about each option, refer to the following sections.
Network Setup
Select whether to acquire the IP Address automatically or manually or, when acquiring manually, set the IP
Address and Subnet mask. To access the Network Setup menu, follow the steps below.
Automatic:
To perform the procedure, DHCP on your server or router must be valid.
1 ) Press HMG.
The Home Media Gallery menu appears on screen.
2 ) Select HMG Setup
Use the arrow buttons to highlight an option then press
Network Setup
3 ) Select
Auto DHCP
4 ) Select
Yes
5 ) Select
The flat panel TV seeks and acquires an IP Address if available.
6 ) Press EXIT or HMG to exit Home Media Gallery.
Manual:
Before activating, check your media server for IP Address and Subnet mask information.
1 ) Access the
Auto DHCP.
2 ) Select
No
3 ) Select
4 ) Select the appropriate box.

Use
No need to enter Default Gateway and DNS Server data.
5 ) Enter the figures using buttons 0 to 9.
Subnet mask (such as 255.255.255.0): Enter the same figures.
IP Address (such as 192.168.201.***): Enter the same figures as used in the media server (PC, etc.). For
***, enter 3-digit figures (0 – 254) that have not been used for other network connections.

Use
6 ) Press ENTER on the appropriate box after the entry is complete.
Repeat Steps 4 to 5 to complete Network setup.
7 ) Press EXIT or HMG to exit Home Media Gallery.
118
En
Network Setup
Auto Connection
Default Settings
from the menu.
.
.
.
Network Setup
through the
.

or to highlight an entry item (IP Address or Subnet mask) then press

or to highlight other entry areas.
On
.
ENTER
HMG Setup
.
.
ENTER