Set The Clock; Create The List Of Channels - Pioneer Elite KURO PRO 111FD Operating Instructions Manual

Basic Operations For Television Viewing
03

3.2.4 Set the Clock

Set the flat panel TV's clock to take advantage of many built-in features such as Time Zone and D.S.T. (Daylight
Saving Time) activation for digital TV broadcast.
Note: If the panel's power cord is unplugged or there is a power outage, the time must be reset.
Follow the steps below to set the clock.
1 ) Access the
Digital Tuner Setup
2 ) Select
Clock
3 ) Select
Time Zone
4 ) Select
5 ) Select the time zone for your area.
6 ) Select the menu option
7 ) Select the proper option for your location.
8 ) Press HOME MENU to close the menu and exit.

3.2.5 Create the List of Channels

This section describes how to search for and set up TV channels. There are two ways to add channels to your flat
panel TV, Auto Installation for automatic channel selection or manual channel assignments. The Auto Installation
adds all available channels from your selected TV provider. Once all channels are added to the list, simply delete
any unwanted channels. This section provides steps to add/remove channels.
Auto Installation
Auto Installation searches for and adds TV channels to your list of viewable channels. Using the remote control,
follow the steps below to automatically select all available channels.
1 ) Access the
Auto Installation
2 ) Select
Air/Cable, Language
3 ) Select
4 ) Select an option.
• Signal type: Air or Cable
• Language: English, Français or Español
• Time Zone: Atlantic, Eastern, Central, Mountain, Pacific, Alaska, or Hawaii
38
En
System Setup through the
from the System Setup menu.
from the Digital Tuner Setup menu.
from the options.
Time Zone
D.S.T.
D.S.T. to activate/deactivate Daylight Saving Time.
System Setup
through the
from the System Setup menu.
Time Zone
, or
Setup .
: Atlantic
: On
Setup
.
from the Auto Installation menu.