Assign A Manufacturing Code To The Remote Control; Issue A Library Search For A Manufacturer Code - Pioneer Elite KURO PRO 111FD Operating Instructions Manual

Use Other Equipment With Your Flat Panel TV
To delete a learned code, overwrite it with a new code on the same button or follow the directions below.
1 ) Concurrently press EDIT/LEARN and 2.
The selected mode indicator flashes when the remote control is ready to be learned.
2 ) Press and hold TV for more than two seconds.
The remote control starts deleting all learned codes for selected modes. When completed, the mode
indicator blinks Off and the remote control returns to normal operation.

5.1.2 Assign a Manufacturing Code to the Remote Control

To assign a preset Manufacturing code to the panel's remote control,
follow the directions below. (For Manufacturing codes, refer to "8.2
Manufacturer Codes to Program into the Remote Control.")
1 ) Press SELECT to choose the device to program.
2 ) Press EDIT and 1 at the same time.
The selected mode indicator flashes when the remote control is
ready to be programmed.
3 ) Use the number buttons to enter a manufacturer code.
When the indicator turns off, the code has been programmed into
the remote control.

5.1.3 Issue a Library Search for a Manufacturer Code

If the code for a particular device is unknown, cycle through the
available codes for a similar unit then sample some functions for that
code.
To find the code that properly operates the unit, follow the steps below
using differemt codes to find the best match.
1 ) Press SELECT to choose the device to program.
2 ) Press EDIT and 3 at the same time.
The selected mode indicator flashes when the remote control is
ready to search the code library.
3 ) Sample the code using a SOURCE POWER, PLAY, 1 or CH+
command.
4 ) Use the up/down arrow (/) buttons to advance to the next code
if the code fails to control the device.
Another option is to return to the previous code and repeat Step 3.
5 ) Press ENTER to lock in the code that properly operates the device.
All the available buttons for the selected mode are added when
the mode indicator flashes on for one second. The remote control
then returns to normal operation.
1 2 3
4 5 6
7 8 9
RECEIVER
VOL
INPUT
SELECT EDIT/LEARN
TV CBL DVD
RCV SAT VCR DVR
FREEZE
SPLIT SWAP SHIFT
1 2 3
TOP MENU
ENTER
HOME
MENU RETURN
SAT / DVD MENU
HDMI
CTRL
SOURCE STOP REC
HMG
RECEIVER
VOL
INPUT
SELECT EDIT/LEARN
TV CBL DVD
RCV SAT VCR DVR
05
79
En