Skip Or Delete Unwanted Channels - Pioneer Elite KURO PRO 111FD Operating Instructions Manual

Basic Operations For Television Viewing
9 ) Select OK then press ENTER.
The entry is complete.
10 ) Press HOME MENU to exit the menu.

3.2.6 Skip or Delete Unwanted Channels

The Auto Installation process adds all channels available from your TV service provider. However, there may be
some channels that are unwanted or are not age-appropriate for your home. This section explains how to bypass
or delete unwanted channels when moving up/down one channel at a time and what programs are available for
viewing.
To skip or delete unwanted channels, use the remote's CH+/CH– buttons to reset the status for those channels.
Follow the steps below to change a channel's status.
1 ) Access the System Setup
Digital Tuner Setup
2 ) Select
• Digital TV channels: Channel management > Channel Options >
3 ) Scroll to or highlight an unwanted channel number.
4 ) Press ENTER to reverse the status for that channel.
When there is a check mark next to the channel, it disappears.
5 ) Press RETURN.
A confirmation screen appears.
Yes
6 ) Select then press ENTER.
The Channel Delete setting is complete.
7 ) Press HOME MENU to exit the menu.
If you select the
Options menu (no confirmation screen appears). Skip Steps 5 and 6.
The instructions for restoring a skipped channel are the same as above. In Step 4 a check mark appears next to
the added/restored channel.
To skip an analog channel, follow the steps below.
• Analog TV channels: Manual Adjust > Store > No
Radio Skip
This function allows skipping of radio channels at a time. To set this option, follow the steps below.
System Setup
1 ) Access the
2 ) Select Digital Tuner Setup
Channel management
3 ) Select
Radio Skip
4 ) Select
On
5 ) Select .
6 ) Press HOME MENU to exit the menu.
through the Setup .
Analog TV Setup
or
XXXX 00001.000
XXXX 00002.000
XXXX 00003.000
XXXX 00004.000
XXXX 00005.000
XXXX 00006.000
XXXX 00007.000
XXXX 00008.000
XXXX 00009.000
(Channel Skip) option in Step 3, the setting is complete when exiting the Channel
Setup
through the .
from the System Setup menu.
from the Digital Tuner Setup menu.
from the Channel management menu.
from the System Setup menu.
(Channel Delete) >
03
(On)
41
En