Pioneer Elite KURO PRO 111FD Operating Instructions Manual page 18

Install Your Flat Panel TV
02
Attach the Light-Blocking Shield
Note: Attach the light-blocking shield after anchoring the base cover on a flat stable place.
Peel off one side of the double-stick tape on the light-blocking shield and attach the shield onto the base cover.
Note: Be careful that the light-blocking shield does not catch on the pipe insertion holes. Anchor the light-
blocking shield so that there are no gaps. If there is a gap, the light-blocking shield may peel off.
18
En
Conduct after attaching the flat panel TV onto the stand.
Light-blocking shield
Front
Base cover
Rear
Rear
Front