Easy Connections; Using Other Types Of Audio/ Video Output - Pioneer DVR-LX60D Operating Instructions Manual

Connections
02

Easy connections

The setup described below is a basic setup
that allows you to watch and record TV
programmes, and play discs. Other types of
connections are explained starting on the
following page.
Important
• These connections use SCART cables
(not supplied). If your TV (or VCR) does
not have a SCART connection, and you
want to use the supplied audio/video
cable, see Using the supplied audio/video
cable below.
• The AV1 (RGB)-TV AV connector can
output ordinary (composite), S-video or
RGB video, plus stereo analog audio. The
AV2 (INPUT 1/DECODER) connector
accepts ordinary, S-video and RGB video
input, as well as stereo analog audio.
See AV1 Out on page 131 and AV2/L1 In
on page 132 for how to setup these
options.
• Before making or changing any rear
panel connections, make sure that all
components are switched off and
unplugged from the wall outlet.
To antenna input
From antenna output
VCR
To recorder's
antenna input
AV2 (INPUT 1/
DECODER)
AUDIO VIDEO
R L
ANTENNA
IN
S-VIDEO
INPUT 3
AV 2 (INPUT 1/DECODER)
OUTPUT
OUT
Y P P
B R AV 1 (RGB) – TV
COMPONENT VIDEO OUT
AV1 (RGB) - TV
16
TV
En
1
Antenna/cable TV
wall outlet
From SCART AV
connector
3
DIGITAL
AUDIO OUT
HDMI OUT COAXIAL
ANTENNA(DIGITAL)
G-LINK IN
OUT IN
5 V 30 mA
CONTROL
2
To SCART AV
connector
1 Connect your TV antenna to the
recorder and TV.
See Connecting a TV antenna on page 15 for
details.
• If you want to incorporate a VCR in your
setup, connect it before the recorder (i.e.,
between the antenna wall outlet and the
antenna input on the recorder).
2 Use a SCART cable (not supplied) to
connect the AV1 (RGB)-TV AV connector on
this recorder to the SCART AV connector on
your TV.
3 Use another SCART cable to connect the
AV2 (INPUT 1/DECODER) AV connector to
a SCART AV connector on your VCR.
Tip
• This recorder has a 'through' function
which allows you to record a TV
programme from the built-in TV tuner in
this recorder while watching a video
playing on your VCR (To use this feature
when the recorder is in standby, Power
Save must be set to Off — see Power
Save on page 127).
Using other types of audio/
video output
If you can't use the SCART AV connector to
connect your TV to this recorder, there are
standard audio/video output jacks, as well as
an S-video and component video output.
Using the supplied audio/video
cable
AC IN
To audio input
To video input
AUDIO VIDEO
OUTPUT OUTPUT
2 1
AUDIO VIDEO
R L
ANTENNA
IN
S-VIDEO
INPUT 3
OUTPUT
OUT
Y P B P R
COMPONENT VIDEO OUT
TV
DIGITAL
AUDIO OUT
AV 2 (INPUT 1/DECODER)
COAXIAL
HDMI OUT
ANTENNA(DIGITAL)
G-LINK IN
OUT IN
CONTROL 5 V 30 mA
AV 1 (RGB) – TV
AC IN