Displaying Disc Information On-Screen - Pioneer DVR-LX60D Operating Instructions Manual

Playback
08
Displaying disc information
on-screen
You can display various on-screen
information about the disc loaded or the
HDD.
DISPLAY
• Display/change the on-screen
information.
• Press once to show the HDD and
removable disc (DVD, etc.) activity
together. Press again to show the status
of just the currently selected playback/
recording device (HDD or removable
disc).
• To hide the information display, press
DISPLAY repeatedly until it disappears.
HDD and removable disc activity
display
Press DISPLAY once to see the HDD and
removable disc (DVD, etc.) activity. Use the
HDD/DVD button to switch between the two
kinds of display.
The example displays below show high-
speed copying from HDD to DVD, and HDD
chase playback.
HDD
Remain 10h35m
Stop
HDD
Remain 10h35m
Chase Play
Rec
Relative playback position
84
En
Rec Mode SP(2h00m/DVD)
Hi-Speed Copy
DVD-RW Video
HDD DVD
Remain –h––m
Stop
0h08m left
Rec Mode SP(2h00m/DVD)
DVD-RW Video
Remain 0h52m
Stop
Recording time
Shows recording restrictions for
the current channel programme
Stop
DVD-RW VR Resume
Original XP (1h00m/DVD)
Finalized
Disc Name : Comedy shows
Indicates copy-protected material
Indicates a multi-angle scene
Play 3–2 0. 00. 15
DVD-R Video Chapter Time 0. 00. 21
Chapter Total 0h01m52s
Title Name : 21/11 Football match
Indicates the data transfer rate
Tip
• See Switching camera angles on page 83
for more on multi-angle scene
switching.
• When using the simultaneous play and
record feature, the display shows
information for playback only.
• During real-time copy, the copy source
playback information is displayed.
• The Video mode DVD-R/-RW displays
become the same as a DVD-Video disc
once the disc is finalized.
• The total recording time figure shown in
parenthesis is calculated based on a
12 cm/4.7 GB disc at the displayed
record setting.
• Recording and playback times for TV
recordings are approximately 0.1 %
shorter than the actual time. This is
because of the slightly different frame
rates of TV broadcasts versus DVD.
• The frame number is shown next to the
elapsed time display when the disc is
paused.
• Copy Once or Can't Record messages
may appear in the stop or recording
displays. These indicate that the
broadcast TV programme contains copy
control information.
ABC Pr 1
Stereo
Rem. 0h35m Copy Once
DVD Mode
!
4.32Mbps