JVC NX-MD1R Service Manual page 26

Compact component md system

Hide thumbs Also See for NX-MD1R:

Table of Contents

NX-MD1R/NX-MD1

Removing the cartridge holder assembly

Remove the two screws J on the top side of the

loading assembly.

Removing the slide bar and the eject bar

Prior to performing the following procedure, remove

the cartridge holder assembly.

Remove the slide bar upward.

Move the eject bar outward until it stops as shown in

Fig.14. Push the convex part g on the bottom of the

body and remove the eject bar from the chassis.

1-26

(See Fig.14 and 15)

Eject bar

(See Fig.14 and 15)

Slide bar

Cartridge holder assembly

Fig.14

Boss k

Eject bar

Cartridge holder assembly

Fig.15

Eject bar

Part g

Slide bar

UD base

Table of Contents

Show Quick Links

Table of Contents

Nx-md1