Switching On And Setting Up - Pioneer DVR-540H-S Operating Instructions Manual

04
Getting started
Chapter 4
Getting started

Switching on and setting up

When you switch the recorder on for the first
time, you can make several basic settings
using the Setup Navigator feature. This takes
you through setting the clock, the internal TV
tuner and the video output.
If you're using the recorder for the first time,
we strongly recommend you use the Setup
Navigator before starting to use the
recorder.
1 Switch on your TV and set the video
input to this recorder.
STANDBY/ON
2 Switch on the recorder.
When you switch on for the first time, your
TV should display the Setup Navigator
screen (If the Setup Navigator doesn't
appear, you can also access it from the
Initial Setup menu; see page 110).
ENTER
3 Choose a language (then
press ENTER).
p
Clock Setting
Help
Setup Navigator Setup Navigator
This will also set the audio, subtitle and DVD
menu language preferences.
30
En
Language
English
Français
4 Start the Setup Navigator.
ENTER
Clock Setting
Complete this setup before you
Help
start using your recorder.
Setup Navigator Setup Navigator
Start Start
Cancel
Please use the Initial Setup if you
want to make more detailed settings.
• If you don't want to use the Setup
Navigator, press
then press ENTER to exit the Setup
Navigator.
ENTER
5 Select 'Antenna' or 'Cable'
depending on how you receive your
terrestrial TV channels.
Clock Setting Auto Channel Setting
Help
Setup Navigator English
Setup Navigator Antenna
Cable
Do not Set
After selecting Antenna or Cable the
recorder starts automatic tuning. This takes
a couple of minutes to complete.
Tuning
Cancel
• Select Do not set if you want to skip
channel setup (because they have
already been set up, for example).
• You can go back to the previous screen
at anytime in the Setup Navigator by
pressing RETURN.
to select Cancel,
7/68