Rear Panel Connections - Pioneer DVR-540H-S Operating Instructions Manual

02
Connecting up
Chapter 2
Connecting up

Rear panel connections

AC IN
3
1 OUTPUT 1
Stereo analog audio, S-video and composite
video output for connection to a TV, monitor,
AV receiver, etc.
2 INPUT 1/AUTO START REC
Stereo analog audio, S-video and composite
video input for connection to a satellite
receiver, set top box, etc.
3 AC IN
Connect to a power outlet using the supplied
power cable after making all other
connections.
4 COAXIAL DIGITAL OUT
A digital audio output for connecting to an
AV amp/receiver, Dolby Digital/DTS decoder
or other equipment with coaxial digital input.
5 CONTROL IN
Use to control this recorder from the remote
sensor of another Pioneer component with a
CONTROL OUT terminal and bearing the
mark. Connect the CONTROL
Pioneer
OUT of the other component to the
CONTROL IN of this recorder using a mini-
plug cord.
16
En
Y
OUTPUT 1
R L
P
B
DIGITAL CONTROL
OUT
P
R
COAXIAL IN COMPONENT AUDIO
VIDEO OUT
OUTPUT 2
4 5 6 7
6 COMPONENT VIDEO OUT
A high-quality video output for connecting to
a TV or monitor with a component video
input.
7 OUTPUT 2
Stereo analog audio, S-video and composite
video output for connection to a TV, monitor,
AV receiver, etc.
8 INPUT 3
Stereo analog audio, S-video and composite
video input for connection to a satellite
receiver, set top box, etc.
9 VHF/UHF IN/OUT
Connect your TV antenna to the VHF/UHF
IN (RF IN) jack. The signal is passed
through to the VHF/UHF OUT jack for
connection to your TV.
1 2
INPUT 1 / AUTO START REC
R L
VIDEO AUDIO VIDEO
S-VIDEO S-VIDEO
INPUT 3
8
IN
OUT
VHF/UHF
9