Pioneer DVR-540H-S Operating Instructions Manual page 124

15
Additional information
Problem
Front panel display
shows 'LOCK' when a
button is pressed
Can't use One Touch
Copy (HDD to DVD)
Can't use One Touch
Copy (DVD to HDD)
The picture freezes and
the front panel and
remote control but-
tons stop working
A device connected via
USB does to function.
(DVR-640H-S/DVR-543H-S
only)
If the unit does not operate normally due to external effects such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.
124
En
Remedy
• The Child Lock is on; turn off in order to use the recorder (page 46).
• Make sure that there is a recordable DVD-R/-RW loaded with some
free space for recording and fewer than 99 titles already on the disc.
Also make sure that for a Video mode disc or a DVD+R, the disc isn't
finalized.
• Make sure there is a recordable DVD+R/+RW loaded with some
free space for recording and fewer than 49 titles already on the disc.
• If you delete a title from a DVD+R/+RW disc, the number of
remaining recordable titles may not decrease.
• Further recording is not possible on a finalized DVD+R. Check that
there isn't a disc menu on the disc you're trying to use.
• If the title currently playing contains material that is copy-once
protected, One Touch Copy will not work.
• One Touch Copy can't be used for titles over 8 hours long when
copying to DVD+R/+RW (though you can use a DVD+R DL).
• One Touch Copy can't be used for MN1 to MN6, SEP, SLP or EP titles
when copying to DVD+R/+RW.
• One Touch Copy doesn't work if the recorder is already recording to
DVD.
• Make sure that there is space available on the HDD and that there
are fewer than 999 titles on the HDD.
• One Touch Copy doesn't work if the recorder is already recording to
the HDD.
STOP then try restarting playback.
• Press
• Press the front panel
off, then switch back on and restart playback. If the power fails to
switch off, press and hold
power switches off.
• Check that it is a device that may be connected to this unit (digital
camera, USB memory, memory card reader or printer).
• Use a USB cable less than 5 m in length.
• Check that the USB cable is inserted fully.
• Check that the USB device is powered on.
• Only the first digital camera, USB memory or memory card reader
connected is readable by this unit. Unplug multiple devices and
connect the device you want to use first.
STANDBY/ON button to switch the power
STANDBY/ON for 5 seconds until the