Pioneer DVR-540H-S Operating Instructions Manual page 107

The Video Adjust menu
ENTER
3 Select the setting you want to
adjust.
Memory1
Motion
Prog. Motion
PureCinema
3-D Y/C Motion
YNR
CNR
White AGC
White Level
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and
still picture quality when video output is
set to progressive.
• PureCinema – This setting optimizes the
picture for film material when the video
output is set to progressive. Usually this
is best left set to Auto 1; try switching to
Auto 2, On or Off if the picture appears
unnatural.
• 3-D Y/C – Adjusts the brightness / color
separation.
• YNR – Adjusts the amount of noise
reduction (NR) applied to the Y
(brightness) component.
• CNR – Adjusts the amount of noise
reduction (NR) applied to the C (color)
component.
Note
1 When White AGC is On, the White Level setting can't be adjusted.
1 ch
Still
Auto1
Still
Off Max
Off Max
Off
Min Max
• White AGC – Turn on for automatic
white level adjustment.
• White Level – Adjusts the intensity of
white.
• Black Level – Adjusts the intensity of
black.
• Black Setup – Corrects the standard
reference black level.
• Hue – Adjusts overall balance between
red and green.
• Chroma Level – Adjusts how rich the
colors appear.
ENTER
4 Adjust the currently selected
setting.
HOME MENU
5 Press to exit.
You can now use the preset for any other
input or the built-in TV tuner.
Tip
• To see more of the picture as you adjust
different settings, press ENTER after
selecting the setting you want to adjust.
13
1
107
En